Tightening a kitchen sink faucet

How to Repair a Loose Kitchen Sink Faucet – Faucet Tightening

Faucets are undoubtedly some of the most used fixtures in a home. For this reason, they require frequent maintenance since they wear out over time.

Loose faucets are very frustrating. This is because the looseness messes with your ability to effectively turn it on and off. The faucets also make squeaking noises that can be irksome. This is why everyone needs to learn how to tighten them.

Tightening loose faucets is as simple as tightening the screws using simple tools. Doing it yourself will save the money that you could have spent on a plumber.

What's more, you also get to save up to 10 percent of your water bill. ​The easiest way to fix a loose kitchen faucet is to do it the right way.

In this article, we will discuss how you could tighten the faucet on a kitchen sink. Before that, however, let us tell you some of the common causes of a loose kitchen faucet.

Common Causes of Loose Faucets:

Dripping faucets are the largest causes of water wastage in homes today. This means that you have to deal with a ballooning water bill that will require you to pay for water you have not even used. Your faucet might become loose and start dripping due to a number of factors.

1. Wearing out of the O-ring

An O-ring is a small disc attached to the stem screw that holds a faucet handle in place. Over time, the O-ring wears out or becomes loose, which can lead to a loose faucet handle. However, this is a problem for cartridge faucets.

2. Wobbly faucet base

Since a faucet pivots on its center, repeated use might cause the faucet base nuts to become loose. This leads to a wobbly faucet base that can cause difficulties when turning the faucet off and on and cause leaks.

How to Tighten a Loose Kitchen Sink Faucet

The faucet handle and base are the two critical points that often become loose.

Before starting to fix a loose faucet handle on your sink, here is what you will require to complete the project.

Things you will require

  • Hex head wrench set
  • Masking tape
  • Flashlight
  • Screwdriver
  • Adjustable wrench
  • Basin wrench

1. Tightening a Faucet Handle

The faucet handle might come loose after repeated use. This could cause dripping as well as reduce the ability to turn the faucet on and off easily. Follow the steps below to tighten your faucet handle.

1. Before you begin, ensure that you rid the sink cabinet of all objects that could hinder the access to the supply valves at the back of the sink cabinet.

2. Next, turn off the water supply to the faucet.

3. Inspect the handle of the faucet. Depending on the type of faucet on your sink, you could find a setscrew or decorative caps fixed on the handle top.

4. Slide the end of the correct size of the hex head wrench into the set screw and turn clockwise until it is tight. Ensure that you position the handle in such a way that you can access the setscrew easily.

5. For faucet handles with decorative caps as opposed to setscrews, use a masking tape to cover the caps.

Afterwards, slide a flat head screwdriver under the cap edge and lift to remove the cap from the handle. Below it, you will find the setscrews that you need to tighten by turning them clockwise.

When done, replace the caps and remove the masking tape from the handle top.

6. Turn the water supply back on.

2. Tightening Your Faucet Base

A loose kitchen faucet base will often cause leakages and reduce the effectiveness of your faucet. This often happens due to a continued use. Below are the steps to tighten your faucet's base.

1. To begin with, remove all items that might get in the way of reaching the supply valves at the back of the sink cabinet. Turn the valves clockwise to turn off the water supply to the faucet.

2. Next, open the faucet to remove pressure in the line that runs from the valve to the faucet. Then slide on your back into the cabinet.

3. Since the cabinet might be dark, ensure that you have a flashlight. With enough light from your flashlight, set your adjustable wrench to the same size as the supply hose nut. This is to help loosen the nuts that hold the lines to the faucet base inlet.

4. Once loose, use a basin wrench to tighten the nuts that hold the base to the sink. These need to be turned clockwise for both faucets.

5. Lastly, reconnect the water line and turn the supply valves to deliver water to your faucets.​

Final Thought

Evidently, tightening a undermount kitchen sink faucet of your house does not have to be a daunting task, especially with the right kind of guidance and equipment. This is why we set up this guide to help you.

2 thoughts on “How to Repair a Loose Kitchen Sink Faucet – Faucet Tightening”

Leave a Comment

Your email address will not be published.

Scroll to Top